12
ENGLISH
BAR-18-12W-IP65 User manual
8.1. FUNCTIONS DESCRIPTION
All the BAR-18-12W-IP65 functions are selectable by using the MENU BUTTON on the
Control Panel. Here below there is an explanation about the device’s functions.
1) DMX CHANNEL SELECTION
After the selection of this function, the display shows the current value of the DMX
Channel. Pressing the buttons UP and/or Down, it is possible to change the value in
order to select the desired DMX Channel. Press the ENTER button to confirm the oper-
ation.
2) DMX CHANNELS NUMBER CONFIGURATION
BAR-18-12W-IP65 can be configured with three channel modes in order to be man-
aged by a DMX controller. This function allows the selection of the desired mode.
The three possible modes are
9Ch
,
23Ch
and
72Ch.
Press the ENTER button to confirm
the selected mode
3) Color Jump
This is an automatic mode. The LED bar is fully lit and the effect is the jump between
the different colors with the speed set by the user (0 ÷ 99) by using the UP and DOWN
buttons.
4) Color FADE - PULSE CHANGE
This is an automatic mode. The LED bar is fully lit and the transition between colors
occurs cyclically with fades and pulses. The User can set the transition speed (0 ÷ 99) by
using the UP and DOWN buttons.
5) Color RUN 1
This is an automatic mode. The LED bar is fully lit and the transition between colors
occurs by changing the color to each individual LED creating a scrolling effect. The User
can set the scrolling/transition speed (0 ÷ 99) by using the UP and DOWN buttons.
6) Color RUN 2
This is an automatic mode. The LED bar is fully lit and the transition between colors
takes place with a mix of effects of fades, impulses and scrolling. The User can set the
effects speed (0 ÷ 99) by using the UP and DOWN buttons.
7) RUNNING CHANGE MODES
This function allows selection between 15 different automatic modes (0 ÷ 14) with scroll
effects and color combinations. Selection is made by using the UP and DOWN buttons.
8) RUNNING CHANGE MODE SPEED
This function allows to set the speed (0 ÷ 99) of the “RUNNING CHANGE MODE” select-
ed. The speed setting can be done using the UP and DOWN buttons.