Soundoff Signal nFUSE Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 23

Soundoff Signal nFUSE Скачать руководство пользователя страница 14

nFUSE™ LED Lightbar

nFUSE Lightbar English 0520

14.

PHOTO SENSOR

The photo sensor continuously monitors ambient light conditions and will control functions configured for operation with the photo sensor input. By default, the
photo sensor will (SET) all light modules into low power mode when dark ambient light levels below 50 lux are detected for more than 5 seconds. When ambient
light levels exceed 300 lux for 5 seconds, the low power mode will (CLEAR) turn off and the lightbar will revert back to full intensity.

The photo sensor is subject to ambient light conditions of the specific environment for the vehicle and needs to be thoroughly tested by the installer to ensure
proper light levels and delay are selected to provide the most effective operation in different lighting conditions.

The photo sensor detects ambient light levels, so parking the vehicle under a bright street light during night-time use may (CLEAR) turn off the photo sensor input.
Likewise, driving though a dark tunnel during daytime use may (SET) the photo sensor input. Ensure the operator of the vehicle is aware of such possible
conditions and provide additional controls to the breakout box to allow the operator the ability to manually over-ride the
functions when required.

Changing the ambient light SET/CLEAR levels may be modified by updating the setting in the 'Photo Sensor' tab in the PC Application.

The photo sensor controls may be updated by using the PC App. Refer to the PC App instructions for more detail.

PHOTO SENSOR OVER-RIDE CONFIGURATION INSTRUCTIONS

1. Click on ‘Breakout Box Inputs’ tab and click on ‘P1: Photo Sensor’ and note priority and which functions are activated when the photo sensor is active.

NOTICE:

Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.

Improper use or installation may void warranty coverage.

To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at

www.soundoffsignal.com/tech-services/returns/

.

If you have questions regarding this product, contact

Technical Services

, Monday - Friday, 8 a.m. to 5 p.m. ET at

1.800.338.7337

(press #4).

Questions or comments that do not require immediate attention may be emailed to

[email protected].

ENHANCING SAFETY THROUGH INNOVATION

«
...
12
13
14
15
16
...
»

Содержание nFUSE
























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды