ENT2B3(x) 7.10
POWER HARNESS WITH IN-LINE FLASHER
INTERSECTOR LIGHT WITH CABLE
CONNECTOR
SQUARE NUT
WASHER
3/8” MACHINE
SCREW
USE TO JOIN LIGHT TO WEDGE BLOCK AFTER
CORD EXIT IS DETERMINED
3/4” SHEET
METAL SCREW
1/2” SHEET
METAL SCREW
USE WHEN
CURVE BLOCK IS
USED
USE WHEN
CURVE BLOCK IS
NOT USED
GASKET
CURVED SURFACE ADAPTOR
(CROWN VIC OR CHARGER)
P=PASSENGER SIDE
D=DRIVER SIDE
WEDGE BLOCKS
UTILITY BLOCK
0° (HORIZONTAL)*
10° FOR TAHOE*
5° FOR CROWN
VIC, IMPALA AND
CHARGER*
DEGREE DESIGNATION IS EMBOSSED IN PART
PASSENGER OR
DRIVER SIDE
DESIGNATION IS
EMBOSSED IN PART
6-32 MACHINE SCREW
WASHER
IF DESIRED CORD MAY BE
EXTERNAL OF THE MIRROR
BY USING THE STRAIN RELIEF
AND THREAD CUTTING
SCREWS SUPPLIED
SQUARE NUT (USE MASKING
TAPE TO HOLD IN PLACE)
GASKET IS ALWAYS
POSITIONED NEXT TO MIRROR
SHELL
RED
BLACK
GREEN
WHITE
FROM FLASHER
FROM LIGHT
COLORS AND LETTERS ON
CONNECTORS MUST MATCH
DO NOT INSTALL CONNECTOR
UNTIL LIGHT IS INSTALLED ON
MIRROR AND WIRE IS RUN TO
FINAL TERMINATION POINT
USER SUPPLIED 3A FUSE ON RED WIRE
DO NOT
CONNECT DIRECTLY TO POWER
INTERSECTOR LED LIGHT
ENT2B3(x)
* INDICATES FOR WHAT PART WAS DESIGNED. INSTALLATION
ON OTHER VEHICLES IS INSTALLER’S RESPONSIBILITY.
