SoundMax SM-DVR78FHD, Инструкция по эксплуатации

Страница: 5 / 20

4
4
Instruction Manual
•
Before removing memory card stop
recording. Press on the card until a click to
remove it.
•
Motion detector recording is available
after you switch on this item in the setting menu
(see “Setup“ paragraph below for more details).
The unit will go to recording mode if there is
motion in front of the lens. When a motion is
detected, the unit will start to record a video
fragment (no matter whether there is motion or
not during the recording period), after the
fragment is recorded, the unit comes to
standby mode till a motion is detected again.
•
G-sensor. If overload resulting from an
impact exceeds the setup value (1 g =
9.8m/s^2; see “Setup“ paragraph below for
more details), the current video fragment
will be automatically protected from re-
recording.
Playback mode
•
Stop the recording and press MODE
to enter playback mode. Press UP/DOWN
button to choose the file. Press OK button
to play the selected file. Press OK button to
stop or resume playback.
•
In file playback mode select a file, then
press the MENU button. A menu will
appear in which you can select to delete
or protect it. Select either option, then
press OK button to confirm.
Setup
Press the MODE button to choose the
needed operation mode (Video/Photo/
Playback). Press MENU to enter the setup
menu for the current mode.
In the menu press UP/DOWN buttons to select
settings. Press OK button to go
to adjustment of the selected setting; select
options with cursor button and press OK button
to confirm.
Some menu items may be in grey color,
in this case they are not adjustable. The menu
in your unit may be changed without prior
notice and hence be different from the menu
described below.
General system setup
•
Auto shutdown: activate and set the
idle time period of the screen saver or
turn it off.
•
Auto Power Off: select the time period
after which the unit will automatically switch
off or disable this function.
•
During the recording press
UP to mute the sound.
Photo mode
•
Stop the recording and press MODE
to enter the photo mode. In this mode press
the OK button to take photos according to
the settings listed in the "Photo setup"
paragraph.
•
While recording press
DOWN to switch to the picture-in-picture
feed of the front and rearview cameras.
•
Format: select this option to
format the inserted SD card. WARNING: all
data on the card will be deleted.
•
Default settings: select OK to reset all
settings to default values.
•
FW version: check the current
firmware version info.
and day by pressing UP/DOWN
buttons and pressing OK button to
confirm.
•
Language: select the system language.
•
Date/Time: set the current year, month
•
Frequency: 50Hz/60Hz.
•
Beep sound: enable or disable
beeping sounds when pressing buttons on
the unit.