SoundMax SM-CSV602, Инструкция по эксплуатации

Страница: 3 / 16

3

To prevent short circuit never put or leave any metal objects (e.g. coins or metal tools) inside the
acoustic system.

Make absolutely sure that the terminals for the speakers are connected to the proper outputs from the
music source.

Never run the wiring on the outside of the vehicle or under it where it can be damaged by road hazards or
the moving parts of the vehicle. Use existing wire channels, sills, panels and molding strips inside the vehicle
to hide the wiring for safety and a neat appliance.

Make sure the wire of the negative pole terminal is disconnected from accumulator while connecting the
speaker terminals. Turn on the various components and slowly advance the volume. Remember to check and
re-check all connections to insure proper installation and use.

Do not continuously use the speaker system beyond the nominal power handling capacity.

Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker
system to protect them from damage caused by the magnets in the speakers.
 If you cannot find the appropriate mounting location, consult your car dealer or your nearest dealer
before mounting.

CAUTION: Take extreme caution when working near the gas tank, gas lines, brake or hydraulic lines and
electrical wiring.
Mounting the speakers
Installation kits are available from your dealer or local stereo shop to help make your installation easy. These
kits also give your installation a clean, custom appearance. Questions about installations methods please
consult a professional auto sound dealer/installer for assistance.

Choose the place of installation for acoustic system. For most acoustic system stipulated regular places in
the automobile approach. In this case you need to know only assembly depth. Before installation acoustic
system check up their assembly depth.

At a choice of a non-standard arrangement of speakers at which it is necessary to cut them in panels of
the automobile,
prepare
a mould. For achievement of ideal arrangement of acoustic system keep up geometry
of a mould, as it is very important for correct installation of your system (A=В=1
27
mm, ØС=5 mm).