![background image](http://html1.mh-extra.com/html/soundmax/sm-cmd302/sm-cmd302_instruction-manual_1335060016.webp)
16
Programming tuner stations
There are six numbered preset buttons, under which you can store and recall stations for each band. Select
the needed frequency, then press and hold a preset button. The station will be saved in the memory under
the corresponding number. To recall a stored station, press the corresponding preset button.
Automatic store/preset scan
Automatic store: Press and hold APS button on the panel or A/PS button on the RC. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To
stop auto store, press this button again.
Preset scan: Press APS button on the panel or A/PS button on the RC. The receiver will scan the saved
stations in all bands for 5 seconds.
Mono/Stereo control (in FM radio mode)
Press ST/MO button on the RC to select MONO or STEREO mode.
Local radio station search
Press LOC/DX button on the RC to choose between the local and long-distance stations.
Storing Stations in memory
This system can keep in 6 memory slots up to 30 stations.
Select the needed frequency band(FM1/FM2/FM3/AM1(MW1)/AM2(MW2)) and then select the station.
Press and hold one of 1-6 buttons on the RC until the broadcast is heard again after an interruption.
RDS operations
TA function: Press TA/AF button to activate/deactivate this function. If the FM station is transmitting the
latest traffic announcement, the device will automatically interrupt any playback an display TRAFFIC on
the screen. After the end of the announcement the device will resume playback.
AF function: Press and hold TA/AF button to turn this function ON/OFF. The radio will automatically switch
to the AF station with stronger signal if available an display a message “NEW FREQUENCY”.
PTY operation
Press
and hold MU/PTY button to select the type of the program (NEWS, POP etc.)