SoundMax SM-CMD3002, Инструкция по эксплуатации

Страница: 15 / 53

15
Inserting the USB device
Insert the USB device into USB jack. Press SRC/PWR button or SOURCE button on the RC to change into USB
mode.
The first USB device track playback will start.
Note:
USB functions (flash memory type) MP3 music play
FAT 12/ FAT 16/ FAT 32 is possible
-
FAT 12/16 (dir: 200 support, file:500 support),
-
FAT 32 (dir: 200 support, file:500 support).
Filename: 32 byte/ Dir name: 32byte.
Tag (id3tag ver2.0)
-
Title/ Artist/ Album: 32 byte support.
USB format supports 2.0. Capacity: 8 MB ~ 1 Gb.
SD/MMC mode
Insert the card into the Sd slot (see the picture).
Press SRC / PWR button or SOURCE button on the RC to choose SD mode.
Loading/eject a disc
-
Press the EJECT button on the face panel to open the inner panel with disk slot. Insert the disc with the
printed side facing upward into the slot, it will start playing automatically.
-
To stop the playback press STOP button on the Remote Control.
-
Press EJECT button to eject the disc.
Playing/ pausing playback
-
When the disc is in the playback will start automatically. Or you can press the PLAY/PAUSE on the RC or
APS/PLAY/PAUSE button to start playback.
-
To ensure good system performance, wait until the unit finishes reading the disc information before
proceeding.
-
Press the PAUSE / PLAY button to pause the playback. Press again to resume the playback.
Stop playback
During MP3/MPEG-4/USB mode, press STOP button on the RC to stop the playback. Press it again to resume the
playback.