SoundMax SM-CMD3002, Инструкция по эксплуатации

Страница: 12 / 53

12
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not
available in you area, the following service is not available, either.
BAND selection
Press the BAND button on the panel or on the RC repeatedly to select your desired radio band during RADIO
mode: FM1, FM2, FM3, AM1, AM2.
Auto/Manual tuning
-
Press and hold PREV/NEXT buttons on the panel or on the RC to choose either manual or auto search.
-
You also may refer to manual search using LEFT/RIGHT buttons.
-
Use UP/DOWN buttons on the panel to select the station that has already been stored.
Auto memory store
Select a band. Press APS/PLAY/PAUSE button on the panel or APS button on the RC and hold for 2 seconds to
enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the current
band.
To stop auto store, press any button except PWR.
Preset scan
Select a band. Press APS button on the RC or APS/PLAY/PAUSE button on the panel to scan all preset stations in
the memories of the current band and stay on each memory stations for about 4 seconds. To stop preset scan,
press the APS button again.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
-
To store a station:
-
Select a band (if needed).
-
Select a station by LEFT/RIGHT or PREV/NEXT buttons.
-
Hold UP/DOWN buttons to store a station.
-
To recall a station:
-
Select a band (if needed).