4
Band selection
In receiving state, press FM button to choose FM band. The FM indicator will light up. Press AM button, move the BAND
switch to select MW, SW1-7 station program. The AM indicator will light up.
Station search
After the band is selected, turn the tuning knob and watch the station frequency on the LCD. The tune indicator will light up
when station signal is sufficiently strong.
Earphones socket
For private listening please insert the earphones into the earphone jack (the speaker inside the unit disconnects
automatically), now you can listen to the radio by earphones.
Supporting rack
It is convenient for you to place the radio.
Antenna
The MW antenna is magnetic bar within the system. Rotate the set for the best reception.
For FM reception, use the telescopic antenna. Pull out the antenna and change its length and angle for the best reception.
For SW reception, pull out the telescopic antenna and keep it vertical to get best reception.
Alarm operation
Setting the alarm time
In the state of clock press and hold AL.SET button, alarm symbol and time appear on the display screen.
Press HOUR button to adjust hour, then press MIN button to adjust minute and set the time to turn on the radio.
When the radio works, press AL.SET button, the alarm time displays and alarm symbol twinkles.
Using alarm function
After the alarm time is set keep the radio in the state of clock.
Press AL.ON/OFF button once. The symbol of
displays, the alarm function begins to work.
When the alarm time reaches the radio will be automatically turned on and receive FM band program.
After the alarm turns on the radio the Power switch does not function. Press AL.ON/OFF button to turn off the radio.
While using alarm function to turn on the radio, it will turn off automatically after 1 hour.
Maintenance and care
If necessary, clean the unit with a piece of cloth dampened with water only (be sure batteries are not inserted into the
battery compartment).
