12
13
English
External Rear Channel Output
SLIMstage makes it possible to add external Rear Speakers to enhance
the surround effect. The Rear Output is disabled while headphones
are connected.
Tip: To add a MAINstageHD as external rear channel, connect a 3.5mm
stereo audio cable from the Rear Output to the Analog 1 input of the
rear MAINstageHD.
Select REAR SPEAkER TYPE
}}
Action:
Navigate to REAR channel menu and select
desired item and press ENTER.
Result:
Rear Channel Output will be optimized to support the
connected Rear Speaker Type.
External Surround LEVEL
Adjusts output level to external rear surround speakers.
}}
Action:
Navigate to LEVEL and press ENTER. Utilizing
familiar surround source adjust rear level and press ENTER
Result:
Selected rear level becomes default
Select IR SENSOR
SLIMstage can be controlled via the normal FRONT IR Sensor, an
optional REAR IR sensor, and the RS-232 port.
Normal is FRONT. Select REAR if controlling via the RS-232 port
(including if connecting an RF remote control adapter) or, if using
another SLIMstage as an external rear channel (to prevent your
IR remote from inadvertently adjusting both SLIMstages).
}}
Action:
Navigate to IR SENSOR and press ENTER.
Result:
IR SENSOR options will be displayed
}}}
Action:
Select FRONT or REAR and press ENTER
Result:
If REAR is selected, confirming menu will display.
IMPORTANT: To re-activate the FRONT IR SENSOR, press MUTE and
SOURCE buttons at the same time for 2 seconds.
}}
Action:
Select CONFIRM or CANCEL.
Result:
The IR sensor will be switched to REAR. Front sensor
will stop working immediately.
Tip: For connectivity information and programming instruction
check the Soundmatters website.
SETUP LOCk
Prevents accidental setup changes
}}
Action:
1. Navigate to LOCK setup
}}
Action:
2. Select LOCK setup and press ENTER.
Result:
LOCK setup menu is displayed
}}
Action:
Select CANCEL or LOCK and press ENTER
Result:
Setting will highlight
Result:
The Setup will be locked from accidental changes
To
unlock
SETUP, sequentially press SETUP,
, EXIT buttons
on remote
VERSION
VERSION displays important information about your SLIMstage
including model, serial number, electronic version and software
version.
}}
Action:
Navigate to VERSION and press ENTER.
RESET all settings to factory Default
This resets all setup options back to their original factory default
position.
}}
Action:
Navigate to RESET all to factory and press ENTER.
Result:
RESET options will be displayed
}}}
Action:
Select YES or NO and press ENTER
Result:
If YES, all Settings will be reset to the factory default
condition.
Press EXIT to revert to previous menu
Press EXIT again to exit SETUP MENU.
ADVANCED
DEFAULT INPUT
INPUT PARAMETERS
REAR
IR
LOCK
VERSION
RESET
ADVANCED
DEFAULT INPUT
INPUT PARAMETERS
REAR
IR
LOCK
VERSION
RESET
ADVANCED
DEFAULT INPUT
INPUT PARAMETERS
REAR
IR
LOCK
VERSION
RESET
ADVANCED
DEFAULT INPUT
INPUT PARAMETERS
REAR
IR
LOCK
VERSION
RESET
ADVANCED
DEFAULT INPUT
INPUT PARAMETERS
REAR
IR
LOCK
VERSION
RESET
IR SENSOR
RECOVERY PRESS MUTE AND
SOURCE BUTTON AT THE SAME TIME
FOR 2 SECONDS
CONFIRM
CANCEL
REAR
TYPE
LEVEL
LOCK
TO UNLOCK PRESS SETUP,
SPEAKER, EXIT BUTTON
CANCEL
LOCK
RESET
MASTER RESET TO FACTORY DEFAULT?
YES
NO
VERSION
MODEL: 40
ELECTRO: 1.00
SW: 1.0.0/1.0.0
SERIAL #: S1035000025
IR
FRONT
REAR
TYPE
SLIMSTAGE
MAINSTAGE HD
L & R SPEAKER
REAR
TYPE
LEVEL
LEVEL
–10 ……...
0
……… 10+
