SELEC TING A SOURCE
SOUND SOURCES
· Press the
FUNCTION
button repeatedly to desired function.
You can choose to listen to following
sources-
· DAB
· FM
· CD/ MP3 playback
· USB MP3 playback
· Aux source (when connected via the AUX jack on the top of unit.)
DAB SCANNING
RE-SCANNING FOR DAB STATIONS
When first used, your radio scanned the DAB band for available stations. The station
services found were then stored i n your system's memory.
You can re -scan the band at any time if you move to a different area or just to refresh the
stored list of available stations.
FULL SCAN
: Press
SCAN
button to enable Auto scan
MANUAL TUNING
: Press and Hold the
SELECT
button in few second until display show
“Manual tuning”, then press
TUNE UP/DN
button enables you to search the band manually,
stepping through the ensemble numbers to check if any have usable signal strength.
Press
SELECT
button again to confirm.
Manual tuning is not necessary in normal operation where scanning will have
automatically established a station list of all useable stations.
DAB DISPLAY MODES
DISPLAY MODE OPTIONS
The bottom line of the display can be switched to show different items of information that
may be transmitted with a DAB station.
Choosing the information
display:
Press the
INFO
button on the top panel repeatedly to change the information
displayed while playing a DAB radio station.
The full range of display options are shown below. Some stations may not broadcast
all of these options.
DLS Scrolling Text > Program Type > Ensemble name> Ensemble Frequency
>
Audio Bit Rate> Signal Strength > Time/ Date
DLS
(Dynamic Label Segment): This is a scrolling
message giving real-time information-
song titles, news headlines, etc.
PROGRAMME TYPE
: This describes the style of the program being
broadcast.
ENSEMBLE NAME:
DAB Digital radio stations are broadcast in multiplexes. Each
multiplex is a bundle of radio stations transmitted i n a signal frequency. There are
