![SOUNDMASTER URD470SW Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/soundmaster/urd470sw/urd470sw_manual_1334681011.webp)
TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try repositioning the aerial while watching the
signal
strength. Signal strength can be displayed by tuning to a DAB station. Press the
INFO
button then turn the TUNING knob,
.
PROBLEM
CAUSE /
SOLUTI
ON
No sound / power
• Volume not adjusted. Adjust the volume.
• Mains cable not securely connected. Connect the mains cable
properly.
• CD contains non-audio/ Mp3 files. Press the
TUN E
button
repeatedly to skip to a CD or MP3 audio track, instead of the data file.
• Ensure the FUNCTION is select to the correct operation mode.
• Ensure the current MODE is correctly selected.
CD display does not
function properly / No
reaction to operation of
any of the controls
• Electrostatic discharge. Switch off and unplug the unit.
Reconnect after a few seconds.
• No CD inserted. Insert a CD.
• CD badly scratched or dirty. Replace or clean the CD, see
Maintenance
.
• Laser lens steamed up. Wait until lens has cleared.
• CD-R / CD-RW is blank or not finalized. Use a finalized CD-R / CD-
RW or a suitable CD Audio disc only.
• Make sure the CD is not encoded with Copyright protection
technologies, as some do not conform to the Compact Disc
standard.
• Press the
FUNCTION
button
to select CD
mode.
The CD skips tracks
• CD damaged or dirty. Replace or clean CD.
• Program is active. Quit program mode.
• A CD badly scratched or dirty may result in improper operation.
Poor DAB/ FM reception
• Make sure FM aerial wire is fully extended.
• Electrical interference in your home can cause poor reception. Move
the unit away from them (especially those with motors and transformers).
USB mode no reaction to
operation of any of the
controls
• Electrostatic discharge. Switch off and unplug the unit.
Reconnect after a few seconds.
• No USB memory stick inserted. Insert a USB memory stick.
• Make sure the USB memory stick is not encoded with Copyright protection
technologies.
• Press the
FUNCTION
button
to select USB
mode.
•
USB drive manufacturer’s non-compliance with the full USB 1.1/ 2.0
standard. Try others USB memory stick.