English - 5
Program Mode
1. During CD stop mode, press PROGRAM BUTTON once. The
“PROGRAM” indicator and number of Program to be
memorized starts from the
first program “
” will light up and
blink continuously.
Press SKIP/SEARCH FORWARD
or BACKWARD
BUTTON to your desired musical track, LCD DISPLAY will
show the appropriate track number. Press PROGRAM
BUTTON to store this track in memory.
2. Repeat above procedure until all desired tracks have been programmed. A total of 20
tracks can be stored in memory.
Remarks:
Whenever SKIP/SEARCH FORWARD
or BACKWARD
BUTTON is pressed, it
will always show the last programmed track first to recall your
memory.
After completing programming 20 tracks, LCD DISPLAY will
show “
PROG
” and flash continuously.
3. Press PLAY/PAUSE BUTTON once to start program playback
and CD Play indicator “
” will light up.
4. To check the programmed tracks, press PROGRAM BUTTON
once during CD stop mode; then press SKIP/SEARCH FORWARD
BUTTON once,
LCD DISPLAY will show the first programmed track number. Repeat above procedure
to read all programmed memory.
5. To cancel programmed memory:
During CD stop mode, press STOP BUTTON once; or open CD DOOR during CD
stop mode. The Program indicator will disappear from LCD DISPLAY.
PLAYING MP3 DISC
Note:
Should skipping of track occur during disc playing try reduce the volume. When
MP3 disc is playing do not open CD DOOR.
1. Pull up the CD DOOR. Put a MP3 disc into CD compartment and close the door. Set
FUNCTION SWITCH to “CD” position.
Note:
Ensure CD DOOR is closed properly and locked in place.
2. When CD DOOR is closed with a MP3 disc inside, total track
number in the disc will be shown on LCD DISPLAY and go to
stop mode. The “DISC” and “MP3” indicators will be shown on LCD DISPLAY.
3.
If there has no disc inside, LCD DISPLAY will show “
” and go to stop mode.
4.
If CD DOOR is not closed, LCD DISPLAY will show “
”.
