GB-1
Location of parts
1. Speaker
12.
CD
Repeat
2.
Dial scale
13. CD skip forward
3.
CD door
14. CD skip backwards
4.
Headphone Jack
15. CD play/pause indicator
5.
AM / FM / CD switch
16.
CD
start/pause
6.
Tuning control radio
17. CD stop
7.
Loudness on / off
18. CD programme button
8.
On / off / volume
19. CD programme indicator
9.
CD arm
20. Line out jack
10. LED
display
21.
FM
wireantenna
11. CD repeat indicator
22. Powercord and plug
Power source
Unwind the AC-power cord (22) and connect to 230V 50Hz power outlet
Antenna
For FM reception, unwind the antenna an place for best reception.
For AM reception turn complete radio because ferritbar is build-in.
Radio operation
1.
Turn the unit on by switching the VOLUME (8) to ON position.
2.
Switch AM/FM/CD (5) to AM or FM
3.
Select soundlevel by turning VOLUME (8)
4.
Select desired broadcasting station with TUNING (6)
5.
Turn off: ON/OFF/VOLUME (8) anticlockwise until “klick”
CD operationg (playback)
1.
Press CD-door (3) to open the disc door.
2.
Switch AM/FM/CD to pos. CD
3.
Insert disc with printed side upwards and release CD-arm (9) downwards
4.
After a few second, total number of track will shown
5.
Press PLAY/PAUSE (16) to start playback
6.
Adjust volumelevel (8)
7.
To stop playback temporalily, press PLAY/PAUSE (16). The play mode indicator will flash.
Press PLAY/PAUSE (16) again to resume playback.
8.
To stop playback, press STOP (17)
Forward skip and backward skip in stop mode
1.
Press FORWARD SKIP (13) or BACKWARD SKIP (14) to select a desired track
2.
Press PLAYPAUSE (16) to start playback at desired track
Search forward and backward during playback
1.
Press FORWARD (13) or BACKWARD (14) and keep pressed to search a desired point of
track
2.
Release buttons at the desired point, playback will resume accordingly.
