background image

Do not put anything except a compact disc into the compartment. Foreign objects can damage
the mechanism. Do not force the compartment by hand during the opening and closing
operations. Keep the disc compartment closed when not in use to prevent dirt and dust from
entering the mechanism. Never place more than one disc in each tray at any time.
If the disc is deeply scratched, or too dirty, the disc may not play.

During playback, pressing and holding the Forward or Reverse SKIP/SEARCH buttons will
cause the player to scan through the current track. At the end of a track the player will skip to
the next track and continue scanning.
At the beginning of a track the player will skip to the previous track and continue scanning.
When the player reaches the end of the final track, or the beginning of the first track, it will stop
scanning.

SEARCH

CAUTION

10

It is possible to program the tracks you wish to play in a sequence of your choice. It is not
possible to enter programs during disc play. Press the STOP button first, then follow the
instructions below.

PROGRAMMING THE TRACK FROM 1 DISC

1.  Select the desired disc.
2.  Press the MEMORY button. The following information will be displayed on the CD Display.

3.  Select the desired track using the Forward and Reverse SKIP/SEARCH buttons.
4.  P

5.
6.

ress the MEMORY button.

The first program selection is now stored in the program memory.

Select the next desired track using the Forward and Reverse SKIP/SEARCH buttons.
Press the MEMORY button.

PROGRAMMING THE TRACK FROM MORE THAN 1 DISC

Programming the track from a different disc. Repeat the same procedure 1-4.

  Press the No. button to select the next disc.
  Repeat procedures 1-4 to program the next tracks.

Continue entering tracks in this way until all the desired tracks are stored.
20 Tracks can be programmed in this way.

Notes:

If the PLAY/PAUSE button is pressed before the MEMORY button is pressed to store a track,
the track will not be programmed and the disc will start playing from the first selected track. Any
track can be programmed to play more than once.

PROGRAMMED DISC PLAY

P - 0 1  00

MEMORY

TRACK

Содержание MCD 5020-1

















Отзывы: