IR1100 / English Instruction Manual
5
CONFIGURATION
Time Display
Analog/digital (time display)
My MediaU
When it is enabled,
“My mediaU” will exist on the main menu. If various “My mediaU”
accounts exist in the radio, select the default login account in here.
Network
Wireless Network Configuration: The system will automatically select the required AP.
Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button, you may
set up the network connection simple via WPS function. Enter it and go to press the
WPS/QSS button on your router within 120 seconds. The connection between the router
and the unit will then be configured automatically.
Manual Configuration: You can choose DHPC (which IP assigned automatically) or
manually input IP address for wireless network connection. When you select manual
setting for wired connection, the following have to be entered: SSID (name of access
point), IP Address, subnet mask, default gateway, preferred DNS server and alternate
DNS server.
Check Network When Power On: Enable/disable WiFi network. When you enable the
WiFi network, the system will automatically search the available AP and select the
required AP.
Date & Time
Set date and time
Set time format display as 12 Hour or 24 Hour
Set date format
(YYYY/MM/DD - DD/MM/YYYY - MM/DD/YYYY)
Alarm
There are three independent alarms - 2 alarms of absolute time setting (Alarm1 and
Alarm2) and 1 alarm for relative time setting (Alarm NAP). Press
“Alarm” (14) on the
remote control to enter this menu directly.
Note:
When the alarm is reached the unit connects to the Internet if the set network is
available. Therefore there may be some delay from the alarm to the radio play. If no
network is connection can be established within one minute, the alarm will change to
Melody automatically.
When Alarm
“NAP” is set, it alarms once in 5/10/20/30/60/90/120 minutes depending on
which one you have set.
Choose Alarm Volume to configure the volume of the alarms.
Timer
Countdown timer (max. 100min)
Language
English /Deutsch / Espanol / Francais / Portugese / Nederlands / Italiano / Pyccknn /
Svenska Norske / Dansk / Magyar /Cesky /Slovensky / Polski / Turkce / Suomi
Dimmer
Turn On - Backlight level
Display
color / monochrome
Power Management
Configure to go to standby mode automatically during in the menu or/ and without Wifi
signal. Choose the power management timer (5/15/30mins) to set the duration of the
radio to switch standby mode automatically when you are not controlling it. Choose Turn
off to ignore the power management function.
Sleep Timer
Turn off or set the sleep timer of 15/30/60/90/120/150/180 minutes. Once the time is
set, there will be a bed icon with remaining minutes at the top right corner and the
device will turn to standby then. Press
“Sleep” (13) on the remote control for the
shortcut of this function.
Buffer
Configure the buffer time of the music playback, 2 / 4 or 8 seconds.
Weather
Activate/deactivate the weather forecast for the standby display. Choose your preferred
temperature unit (
℉
or
℃
) and then proceed entering your location. When activated, the
weather forecast is shown in turns with the clock display on the standby screen (each
10 secs).
