ENGLISH
ENG 4
5. SLEEP
FUNCTION
During radio on mode, press Snooze/Sleep button (3) to turn on Sleep mode, the
sleep time will keep flashing by 5 seconds, within 5 seconds and press Sleep button
can change the duration from 90 min – 15 min. Press On/Off button (4) to cancel sleep
function.
6. The radio OFF mode, select the display Auto OFF / LOW / HIGH dimmer (20) to the
Auto OFF mode, the LCD display light will automatically off in 15 seconds.
- Press any key button to turn the display light on.
DST – Daylight saving time
Press >> / YEAR / DST BUTTON (18) and hold for 3 seconds to toggle on and off DST
function.
RADIO OPERATION
-
Press the On/Off button (4) to turn radio On.
-
Select AM/FM band press the AM/FM band button (2).
-
Select the station using the Tuning Knob (23).
-
Turn the volume knob (22) to adjust volume as required.
-
Press the On/Off button (4) to turn radio off.
Note:
-
The AM band use an internal directional aerial, rotate the radio for best reception.
-
Ensure that the FM antenna (14) is completely unrolled and extended for best FM
reception.
Remark:
-
Temperature range for indoor : 0 to +50°C or 32 to 122 °F
RESET
-
The reset button (9) is located on the back of unit. Use a ballpoint pen to press it
whenever you change the batteries, or unit is not performing as expected. This will
return all settings to default value, and you will lose any stored data (alarm and clock
settings).
PROJECTION UNIT
-
Focus setting : Adjust the projection clock brightness/focus by turning the
brightness/focus adjustment wheel (10) until the projected time is clearly shown on the
ceiling or wall.
-
To flip projected image by 180°, press 180° flip button (11).
NOTE:
PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM.
MAXIMUN PROJECTION DSTANCE IS 3-9 FEET.
SPECIFICATIONS
Frequency:
AM 531 – 1629 kHz
FM
87.5
–
108
MHz
Battery backup:
1 x 3V CR2032 flat lithium battery (not included)
Power source:
AC 230V ~ 50Hz, 5W
Copyrights by Woerlein GmbH, D-90556 Cadolzburg, Germany
Any technical changes without any further announcement