- 12 -
Setting the Clock
Setting the Clock Manually
Caution:
You can set the clock in standby mode only.
1. In standby mode, long pressing the
CLOCK
button on the remote control for 2 seconds or
more to activate the clock setting mode. [24H] or [12H] hour format will blink.
2. Press the
H
/
G
buttons on the unit or / /
D
/
C
buttons on the remote control to
set the 12/24 hour format.
3. Press the
CLOCK
button to store the setting, the hour digits will blink.
4. Repeat above steps 2-3 to set the hour and minute.
Note:
- To exit clock setting mode without storing, press the
L
button.
- If no button is pressed in 10 seconds, the unit exits clock setting mode automatically.
- If a power failure occurs or the unit is disconnected from the mains, the clock setting will be
lost.
Automatically Synchronzies Clock Time
In DAB/RDS station, the unit can synchronize with time transmitted by DAB/RDS station
automatically.
Manual Synchronzies Clock Time
In DAB/RDS station, repeatedly press the
INFO
button on the remote control to view the CT
(clock time) information, then long pressing the
CLOCK
button on the remote control for 2
seconds or more to synchronzies clock time.
