DAB100 / English Manual
3
WELCOME TO
DIGITAL RADIO
Scan Services
Full Scan
Service N/A
▊ ▊ ▊
________
10
C
28
%
BBC Music
Playing
Classics
LocalRadio
TlkSport
Select
TlkSport
...now talking to...
21
Services
Found
Scan Services
Quick Scan
Scan Services
Full Scan
▊ ▊ ▊ _ _ _ _ _ _
10
C
OPERATING INSTRUCTIONS
GETTING STARTED – DAB OPERATION
z
Carefully extend the adjustable antenna
z
Switch ‘ON’ the ‘Battery’ switch to connect to the batteries power.
z
The LCD display will display a greeting “WELCOME TO DIGITAL RADIO” for few
seconds, and then perform a DAB full scanning. The date and time clock will be auto
setting from the transmitted DAB radio signal. It usually takes for few seconds.
THE FIRST TIME SWITCH ON THE UNIT
When this is the first time switch on the unit, it will be automatically connected to the
DAB digital stations and perform scanning. The display will show ‘Scan Services Full
Scan’. In the other words, if the radio has been used before, the last used station will
be selected.
z
During the scanning, the solid bar graph will be display to indicating progress of
scanning until it 100% finished tuning.
z
When the available stations are found, the numbers of stations will show on the
LCD display. The radio will select the first service on the list. All available stations
will be displayed alphanumerically.
NO STATIONS AVAILABLE
If there is no service on the service list after the scan has completed, an information
message will be displayed ‘Service N/A’.
You may need to relocate your radio to a position giving better reception and perform
another scan again or to tune the radio manually.
DAB MODE
DAB AUTO TUNE
Your DAB radio tunes and sets up with minimal effort. All available frequencies are
automatically picked up by the radio. When you turn on the radio, it will perform
quick scan.
All available stations will be displayed alphanumerically.
DAB STATION SELECTION
z
Press ‘UP’/ ‘DOWN’ buttons to cycle through the stations in the list.
The station names will appear once at a time on the bottom line of display.
z
Press ‘SELECT’ button to choose the station on the list you want to listen to.
z
Press ‘VOL+’ / ‘VOL-‘ to adjust to the desired level
DAB SCAN
As time passes, new stations may become available. Check out the new stations
proceed as follows
QUICK SCAN – Press ‘INFO/SCAN’ button to perform a local QUICK SCAN of the DAB
Band III frequencies. As new stations are found the station counter on
the display and the stations will be added to the list.
FULL SCAN – Press ‘MENU’ button to cycle through the list and press ‘SELECT’ button
to choose FULL SCAN, it will perform a full scan of the entire DAB Band III
frequencies. As new stations are found the station counter on the right-
hand side of display will increase and stations will be added to the list.