PL910 / English Instruction Manual
6
CD - MP3 / USB OPERATION
COMPACT DISC CARE
To remove a disc from its storage case,
press down on the centre of the case and lift
the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully
wiped off the discs recorded surface with a
soft cloth. Unlike conventional records,
compact discs have no grooves to collect
dust and microscopic debris, so gently
wiping with a soft cloth should remove most
particles. Wipe in a straight line from the
inside to the outside of the disc. Small dust
particles and light stains will have absolutely
no effect on reproduction quality.
Note:
CD or USB mode have the same operating procedures.
Playing CD or USB
1. Turn on the system and press
the “
FUNCTION
” button to enter into CD or USB mode.
2. CD: Press
the “
OPEN/CLOSE
” button to open the CD door. Place a CD with the printed
side facing up inside the tray, then close the CD door. The first track will start playback.
USB: Insert carefully USB drive in the USB socket. The first track will start playback.
3.
Press “
PLAY/PAUSE
” button to pause the playback. The track time will start blinking.
Press “
PLAY/PAUSE
” button again to resume the playback.
4.
Press “
STOP
” to stop the playback.
TRACK SKIP AND HIGH SPEED TRACK SEARCH IN CD / USB MODE
1. During CD/USB playback, press
“
” (Fast Forward) repeatedly will skip to higher tracks.
Press “
” (Fast Reverse) button and it will go back to the beginning of the same track.
Press “
” button again and it will go to the previous track.
The disc will begin to play from your selected track.
2. To rapidly search forward or backward within a track and locate a specific passage of it,
press and hold
“
” or “
” button. The player will search forward or backward at a high
speed. Release the button when you hear your desired passage and the playback will
resume normal from that point.
3. To select next folder (Album) press the
“ / -” button on the remote control.
REPEAT and RANDOM Function
During playback p
ress the “
PRESET / PLAY-MODE
” button on the unit or the “
P-MODE
”
button on the remote control repeated to choose the Repeat-Mode:
Rep1: plays the current playing track
RepF: plays the current playing folder (only by MP3-CD or USB)
RepA: plays the complete CD or USB
Rand: Random Play-Mode
NOTE: There is no folder in the disc if no MP3 is detected. During playing a CD-Disc, there
has no ALBUM repeating function