PL711
/ English Instruction Manual
2
INSTALLATION
Before installing the turntable, check the package contents to ensure all parts below are
included and free of visible damage. Please retain the original packaging materials.
CONTENT OF DELIVERY
➢
1 x Turntable Unit
➢
1 x Drive Belt
➢
2 x Speakers
➢
1 x Sub-Platter
➢
1 x Turntable Lid
➢
1 x Belt Hook
➢
1 x Slip Mat
➢
1 x Power Adapter
➢
1 x Turntable Platter
➢
2 x Audio Cables for Speakers
➢
1 x Tonearm Counterweight
➢
1 x USB Cable
➢
1 x Anti-Skating Weight
➢
1 x Cartridge Alignment Protractor
➢
1 x 45 RPM Adapter
➢
1 x Instruction Manual & Warranty Card
INSTALLING THE TURNTABLE
・
Mount the product on a level surface.
•
To avoid the effects of vibrations and acoustic pressure,
do not mount the product next to such items as speakers.
•
If the product is near equipment (cell phone, etc.) that
emits strong radio waves, noise may occur.
INSTALLING THE LID, THE BELT AND THE PLATTER
1. Insert the hinge pockets of the lid onto the
hinges of the turntable.
2. Remove the protective packaging and ensure
the turntable is placed on a sturdy and level
surface.
3. Insert the sub-platter into the turntable
spindle located in the middle of the turntable.
4. Loop the drive belt around the sub-platter and
motor
pulley (brass-colored).
5. Carefully place the main platter onto the sub-
platter
6. Using your hands, slowly rotate the platter ten
times in the direction of the arrow.
7. This step is for getting rid of any twists in the
belt and making sure the belt rides smoothly
along the drive rim on the underside of the
platter.
8. Place the slip mat on top of the platter. Make
sure the logo on the mat is facing up.
