DISC4020 / English Manual
ENG 1
LOCATION OF CONTROLS
MAIN UNIT
1) LCD
display
2) Remote
sensor
3) Standby
LED
indicator
4) CD
door
5) USB
Socket
6) SD/MMC
card
slot
7) Snooze
button
8) Alarm
button
9) Stop
/
St-Mono button
10) Play/Pause
button
11) Volume knob
12) On/Standby button
13) Function button
14) Preset EQ button
15) Folder/Pre-Up button
16) Skip/Tuning Up
/
Down
button
17) Memory/Clock-Adjust button
18) Play Mode button
19) FM wire antenna
20) Aux-in jack
21) 3.5mm Headphone jack
22) DC jack
23) AC/DC adaptor
24) DC plug
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other
radio devices
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Connect the DC plug (24) to the DC jack (22) of the main unit, then plug in the AC/DC adaptor (23) to the AC outlet. The unit
will go to standby mode and the Standby LED indicator (3) will light up.
2. Turn on the unit (12), if the LCD display (1) is on with backlighting, it means the power supply is normal. Now your system is
ready to play the music.