DISC4020 / English Manual
ENG 5
Playback of MP3 song via USB storage media or memory Card
Connecting
The system is able to decode and playback all MP3 /WMA file which stored in the memory media with USB connecting port or
SD/MMC memory card.
1. Set the system at standby mode first or other function except SD or USB mode.
2. Plug-in the USB pen-drive with the face up & make sure it going into completely or insert the
memory card in the direction of the arrow as shown in the label on the up side of the memory
card slot. Insert straight without bending.
z
Connecting the USB upside down or backwards could damage the audio system or the
storage media (USB thumb drive/SD/MMC card). Check to be sure the direction is correct
before connection.
3. Set function button (13) to “
” SD/MMC card or “
” USB mode.
4. The system will start reading the storage media automatically after connecting, and LCD display (1) will show the total
number of MP3/WMA files being detected.
5. Repeat the same playback procedure as playing CD/MP3 disc as above.
Remark
-
The system can detect and read the file under MP3/WMA format only at USB/SD mode but not other music file format.
-
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3
player may not be able to play via the USB socket. This is not a malfunction of the system.
-
USB port does not support connection with USB extension cable and is not designed for communication with
computer directly
Removing of USB / memory card
To remove the USB / memory card, turn off the power or switch the function mode to either CD, Aux, or Tuner first. For USB
port – un-plug it by pulling out the USB socket directly, for memory card – pull out the SD/MMC card straightly without bending.
More features
A. Sleep function
1. Press “ Sleep ” button (on Remote) “SLP-90 “ will shown on the LCD display (1).
2. Keep pressing the button to adjust the sleep timer in the order of 90 > 80 > 70 >….10 minutes respectively and sleep icon
“
” will indicate on LCD.
3. System will stop and go to standby mode automatically after running the selected time.
4. To cancel the sleep mode, press “ Sleep ” button until “SLP-off’ displayed and the “
“ indicator disappear on LCD
display.
B. Alarm clock setting
This function allows the system to turn on automatically and wake you up by CD , Tuner, USB or SD mode respectively.
Press and hold the “ Alarm ” button(8) to enter the alarm setting mode, the first digits of clock will flashing with alarm icon
.
Press Skip Up
/
Down
button (16) to set the hour & then press “ Alarm ” button (8) again to confirm. Then press Skip Up
/
Down
” button (16) to set the minutes & press “ Alarm “ button (6) to confirm the alarm time, press Skip Up
/
Down
” button (16) to select wake up mode & press “ Alarm “ button (8) to confirm. Then press Volume knob (11) to adjust the
wake up volume level. Press the alarm to complete the alarm setting.
Remark:-
¾
If there is no music source being detected (such as CD or USB) when the preset time is reached, system will default to
“ Tuner ” function for wake up mode automatically. The system will preset at the latest radio frequency being listened before
switching off
¾
For Tuner wake up, the system will preset at the latest radio frequency being listened before switching off.
¾
There are about 4 seconds for alarm setting mode, this system will return to normal mode automatically if no keys being
pressed in this time frame.
¾
During the alarm on mode, press the “On/Standby “ button(12) will switch off the system.
z
Active/de-active timer function
1. To active the alarm function, press the “ Alarm ” button (8) repeatedly until the alarm indicator “
” is shown on LCD
display (1).
2. To cancel alarm function by press again “ Alarm” button(8) until the timer indicator “
” disappear.
