SoundGate SSICRE07, Руководство по установке

Страница: 3 / 10

3
Subwoofer Input Connection without Optional Amplifi er and without Factory Premium Audio
11. Connect the six inch adaptor harness to the end of the two pin connector. Locate position 2 and 9 on
the radio connector and install one of the blue self stripping connectors onto the wire. Lay the wire in the
open channel, fold the connector body over and squeeze with a pair of pliers until connector snaps shut.
Connect the green wire of the adaptor harness to the wire in position 2 and the brown wire to the wire in
position 9.
Subwoofer Input Connection with Factory Premium Audio
12. Pry the storage tray loose in the center console. Fig. 5
13. Starting at the end of the subwoofer harness that was routed toward the dash, carefully cut the sheath-
ing back about 30 inches. Fig. 6
14. Pull the signal input wire out and route it under the carpet and into the center console. Connect the six
inch adaptor harness to the end of the two pin connector. Locate the blue and white striped wire and the
green and black striped wire in the four-pin connector of the console. Lay the wire in the open channel, fold
the connector body over and squeeze with a pair of pliers until connector snaps shut. Fig. 7
15. Connect the green wire of the adaptor harness to the blue/white wire and the brown wire of the adaptor
harness to the green/black wire. Fig. 8