SoundFreaq Sound Stack SFQ-03, Руководство пользователя

Страница: 14 / 20

.13.

The pair indicator starts blinking quickly to
indicate that the unit and your device have
put into the connection mode.

When a Bluetooth connection is established
successfully, the indicator will be solid on.
5. Select Bluetooth mode by repeatedly pressing
the SOURCE button on the unit or pressing
the Bluetooth button on remote control.
6. Select the desired music and press "Play"
button on your device. The unit automatically
starts playing the audio.

Try again above steps 2 to 5 if the pair
indicator turns solid after blinking for 3
minutes, the pair was unsuccessful.
Using Multiple Bluetooth Devices
Only one device can be used at a time, but you
can switch between different Bluetooth devices.
Make sure each device you want to use has
already been paired, to switch devices:
1. On Sound Stack, press the pair button.
2.
On Bluetooth device, select the connection to
Sound Stack.
This device is now the connected device to Sound
Stack, (the previous connected device is now
disconnected). Repeat those steps to switch the
connected device again.
Note: If the unit has no sound output, please
check if the volume level of your Bluetooth
device connected to the unit is set to the
minimum, or the Bluetooth device is muted.
Playing back from Macbook or Macbook
Pro
1. In the desktop screen, Select the “Open
Bluetooth Preference”.
2. If there is any old “Sound
Stack
” records, remove
it. And then select “Setup New Device” again.
3. Select “Sound Pla” and the type should be
“Audio” in the latest SFQ-03 unit.
Click the “Continue” to proceed pairing process.
4. Once completed, the pairing success screen
will come out.
Note: Don’t quit the page immediately. You
may notice that the previous dialog screen
still shows the device not connected. Just
ignore it. It’s confusing to the user. In fact,
it’s connected already.
5. Open iTune, play a song. Then use mouse to
click the Bluetooth icon and the top right
hand corner of the desktop screen, select
the “Sound
Stack
” option and then select the
“Use as Audio Device (Stereo)”. After a while (a
few seconds), the music will come out
from the SFQ-03. If not, retry to select the
“Use as Audio Device (Stereo)” once again.
The Sound Quality should be good.
Playing back from PC/Notebook
1. Press the “Start” button to open the “Device
and Printers” dialog box.
2. Turn on the SFQ-03 system and press
the
PAIR
button on the unit to put the unit
into the pair mode.
3. Select the “Add a device” in the “Device and
Printer” dialog box. The “Sound
Stack
” icon
will appear on the display.
4. Double click the “Sound
Stack
” icon and wait
until the device has been added successfully.
5. Click the “Close” button to close the “Device
and Printer” dialog box. A ”Sound
Stack
” icon
appears in the dialog box.
6. Double click the “Sound
Stack
” icon and the
device connection screen will be shown.
7. Click the “Connect” button in the “Music and
Audio” option.
8. Once connected, the pair indicator on the
unit will be solid on and the connection
success screen will be shown.