SoundCraft D-MIX 1000, Руководство пользователя

Страница: 16 / 38

C onnec tions
Input 1 Stereo Inputs
The Input 1 sockets accept phono jacks. The Inputs are UNBALANCED. Input 1
may be used for tape machines, CDs or turntables. If they are used for turntables
then the inbuilt RIAA input filters must be selected. This is done by setting the
module jumpers J1 and J2 to position A. See Page 2.13 for jumper details.
Input 2 Stereo Inputs
These Inputs are UNBALANCED. They accept 2-pole mono jacks. These may be
used for sources such as tape machines or CDs. Mono sources can be fed to both
paths by plugging into the Left jack only.
Start Socket
The Start socket accepts phono plugs. A switch contact closes between the screen
and the centre contacts in the module whenever the modules ON switch is depressed.
It may be used to remote start a turntable or tape machine etc. Consult the hand book
for the turntable or tape machine to see if it has remote start capabilities.
Under no circumstances must the mains be placed on these
contacts.
Record Left & Record Right Outputs
The Record outputs may be connected via two phono plugs, one for the left signal
and one for the right signal.
Signal
Gnd/Screen
Signal
Gnd/Screen
Tip
Sleeve
Unbalanced
Center
Contact
Outer
Contact
Signal
Gnd/Screen
2.8 Installation