Soundcraft 328XD and Alesis ADAT and BRC
8
88
8
NOTES ON SINGLE ADAT OPERATION
The 328XD should be set up as outlined above, with a few notable exceptions. As an ADAT has no MIDI
capabilities or a SMPTE output, Timecode cannot be transmitted and the 328XD Transport Controls
cannot be used. The Tape Port should be set to ADAT as above, ensuring that if only one ADAT is
connected that the unused port is set to TDIF.
The ADAT(s) should be set to Digital Input, as outlined on the previous page, and also set to receive
external clock. To set the clock to external, press the <CLOCK SELECT> button on the front panel until
DIG 48K is seen in the display.
NOTE:
If 48K flashes in the display, the ADAT tape is formatted at 44.1kHz. The 328XD should now
be set to generate wordclock at 44.1kHz (see above). The sampling rate will now remain lit on
the ADAT display.
SOUNDCRAFT
HARMAN INTERNATIONAL INDUSTRIES LTD
CRANBORNE HOUSE
CRANBORNE ROAD
POTTERS BAR
HERTS EN6 3JN UK
TEL:
+44 (0) 1707 665000
FAX:
+44 (0) 1707 660742
EMAIL:
SOUNDCRAFT USA
1449 DONELSON PIKE
NASHVILLE TN 37217 USA
TEL:
1-615-360-0471
FAX:
1-615-360-0273
EMAIL:
