Features:
Switching power technology digital power amplifier
Class-D PA power amplifier
with
minimum power consumption
Less rack space and less heat generation
Four channel power amplifier into 19” rack mount unit
Rated power output at 120W, 240W, 350W to 500W by four channels
Four channel separate speaker outputs 8Ω/100V
Balanced input
s
by phoenix connector
s
Each input with separate gain control.
Each channel with high-cut filter.
Built-in auto standby feature to save power consumption
Separate four channel indicators for protection, clip, input and output
Complete short circuit, overload, high temp, clip and DC protection
Wide AC input from 110V to 230V
Description:
The
C
4 series
digital class-D power amplifier
uses
switching
power technology, which features of minimum power
consumption and much higher efficiency up to 85%, moreover it
helps to save installation rack space, generate less heat so as to
extend its performance life span as a result.
The digital class-D amplifiers are of rated power output at 120W,
to
500W by four channels, so it could be used as four zone
multiple sources public address system at minimum cost. The
versatile loudspeaker outputs of both high impedance 100V & low
impedance
8
ohms
gives flexibility for installation.
There are four balanced inputs by phoenix connector for each
channel with gain control. Four separate zone speaker outputs both
by 100V & 8ohms.
The built-in four channel separate high-pass
filters can be enabled or disabled through the dip switch settings.
Automatic standby enable after no detection of signal input for
one minute, immediately start when signal is detected. Visual
working status indicators include protection, clip, input and
output for easy supervision. With complete short circuit,
overload, high temp, clip and DC protection.
Wide AC power supply of 230V, thus it support worldwide sound
system installation.
Introduction
5
/
11
