Sound Storm M312USA, Руководство пользователя

Страница: 4 / 6

Page 7 Page 2
VOL DEFA: After pressing SEL button, VOL will be displayed. Then you can
pre-select a constant switch-on volume by using the VOL knob.
CLK ON/OFF
CLK ON: Clock will always show on the display when power is off.
CLK OFF: Clock will not show on the display when power is off.
4. POWER ON/OFF & MUTE
When the unit is power off, the unit will turn on by pressing any button except
the EJECT and the RELEASE button.
When the unit is power on, press and hold the power button for more than 0.5
seconds, turns the unit off.
When the unit is power on, pressing the power briefly will turn the MUTE on/off.
5. LCD Display
6. CD SLOT
7&8. TUNE, SEEK, TRACK, SKIP UP / DOWN BUTTONS
a) During RADIO mode:
Press the >>| or |<< button briefly to manually tune up/down to the desired
radio station frequency step by step.
Press and hold the >>| or |<< button for longer than 0.5 seconds, to automatically
tune up/down to the radio station frequency of strong signal.
b) During disc, MMC/SD, USB playback mode:
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it
if the playing time is more than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is
less than 2 seconds.
Press the >>| or |<< button and hold to skip forwards or backwards, release
to resume normal playback.
9-14. PRESET STATION MEMORIES 1-6(||, INT, RPT, RDM) BUTTONS
a) During radio mode:
When pressed briefly, these buttons select a preset pre programed stations. If
any of the six buttons are pressed for more than 2 seconds, the station currently
being listened to is memorized into the selected preset button.
b) During disc, MMC/SD or USB mode:
1) Press the TOP/ >|| button briefly to pause the playback of the disc, MMC/SD
or USB. Press again to resume normal playback of the disc, MMC/SD or USB.
Press the TOP/>|| button and hold for approximately 0.5 seconds to play the
first track of the disc, MMC/SD or USB.
2) Press the INT button to sample the first 10 seconds part of each track, and the
INT ON will be visible on the LCD display.
In the process of INT, pressINT button again to stop sampling and to continue
playing the current track, and the LCD will display INT OFF.
3) Press the RPT button once to play the current track repeatedly, and the RPT
ONE will be visible on the LCD display.
During MP3/WMA disc, MMC/SD or USB mode, press the RPT button twice
continuously to play the current folder repeatedly, and the RPT ABM will be
visible on the LCD display.
In the process of RPT, press RPT button again to stop playing repeatedly
mode and the LCD will display RPT OFF.
TROUBLE SHOOTING
Before using the check list please make all the connections first.
If you still have questions after going through the checklist, please consult
your local customer service representative.
Common Symptoms
There is no power.
The CDs cannot
be loaded.
Cause
The fuse has blown.
Presence of CD disc inside the player
Inserted disc is upside down
The surface of CD is extremely dirty
or it is damaged.
Temperature inside the car is too
high.
The volume control is set too low.
There is no sound.
The operation keys
do not work
The sound of the
CD player skips
The antenna cable is not connected. Insert the antenna cable firmly into the
antenna socket of the device.
No radio reception.
1.The built-in microcomputer is not
operating properly
2.Front panel is not properly fix into
its place 1. Switch the device off and on again. Or press
the RESET button.
2. Reinstall the front panel
The device has not been wired
correctly.
The installation angle is more than
30 degrees
Wait until the road becomes smoother before
playing the CD.
Adjust the installation angle to less than 30
degrees
Turn up the volume properly.
Check the connections according to the
wiring diagram.
Cool off until the ambient temperature returns
to normal
Clean the CD or try another CD, if this works
correctly, the first CD is properly damaged.
Insert the compact disc with the label facing
upward
Remove the disc from the player
Replace another fuse with the same
amperage rating.
The car ignition is switched off.
If the power supply is properly connected to
the car accessory, switch the ignition key to
ON or " ACC
" " " .
Solution
The device does
not work correctly
(EJECT, LOAD,
PLAY)
In automatic search
mode the radio does
not stop at a trans-
mitting station. Tune in to a radio station manually. The transmission signals are too
weak.
The CDs are loading
only halfway into
the CD tray. The transport screws have not been
removed. Remove the transport screws before using.
The surface of the road is uneven.
The surface of CD is extremely dirty
or it is damaged. Clean the CD or try another CD, if this works
correctly, the first CD is properly damaged.