www.soundskulptor.com
Document revision 1.1 – Last modification : 21/04/08
PSL1 Assembly guide
26. Regulator heatsinks assembly
Place two M3x10 pan head screws with two nuts on the regulator heatsinks. Insert the regulator pins
into the PCB. Do not solder yet.
27. Top and bottom cover fixing nuts
Add 2 nuts in the top and bottom grooves of both sides of the case (for a total of 8 nuts). They will be
used to attach top and bottom covers.
28. PCB insertion
Insert the PCB into position by sliding the heatsink screws into the case grooves. Make sure the LEDs fit
into the front plat holes.
29. Back plate assembly
Attach the back plate with four M4 countersunk srews.
30. PCB fixing
Attach the PCB to the transformer plate with 2 M3x6 pan head screws.
31. Transformer plate fixing
Tighten firmly the 2 transformer plate fixing
screws.
Copyright ©2008 SoundSkulptor
