Sound Qubed Q1-1200.2, Руководство пользователя

Страница: 6 / 16

+12V ( POWER CONNECTION )
This must be connected to the positive terminal ( +12V ) of
the battery. Recommended wire is 4 gauge
FUSE( 40A x 2 )
Fuses protect the amplifiers from electrical damages.
SPEAKER OUTPUTS
it connects amplifier to speakers. Minimum speaker cable is 12 gauge.
Minimum impedance is 2ohm stereo or 4ohm mono.
GND ( GROUND CONNECTION )
It is connected to the negative or ground cables of the Vehicle.
Recommended cable is 4 gauge.
REM ( REMOTE )
It is connected to sw12V with a trigger cable coming
from the headunit.
Q2-200 OUTPUT ENDPANEL
Q4-90 & Q4-120 OUTPUT ENDPANEL
+12V ( POWER CONNECTION )
Before mounting SoundQubed amplifiers, please disconnect the negative (-) wire from battery to protect any
accidential damage to SoundQubed amplifiers and car audio system.
Q1-750, Q1-1200.2, Q2-200, Q4-90 & Q4-120 are designed to use 4 gauge power cable and ground connection and
equipped with fuses.
Q1-2200.2 and Q1-4500 are using 0 gauge power and ground connection and not equipped with fuses
Connect the power cables to power terminal labeled as +12V.
You have to install the external fuses on the power cable for Q1-2200.2 and Q1-4500
Connect one end of fuse holders to the power cable and the other end of fuse holders to positive battery within
20cm of the same cable.
CLASS AB MULTI-CH OUTPUT ENDPANEL
POWER, GROUND, REMOTE CONNECTION