Product info SPX Series
- 7 -
5 simple steps to rig your SPX array
Safety Note:
The maximum amount of cabinets to be hoisted by the SPX flying frame is dependent
on the configuration of the intended setup. Due to momentum critical forces on
connectors will increase fast when the lifting point is shifted backwards. Consult table
on page xxx to avoid overload situations!
Step 1
When using the Flying frame extender, start
with assembling the extender to the flying
frame. Then connect the flying frame to the
first cabinet in line with the connectors and
Quick Release Pins and attach the hoist at
the corresponding hole.
Step 2
Lift the frame and cabinet to approximately
head-high position to enable attachment of
the next cabinet. Start with attaching the
two connectors at the cabinet in the array
using the Quick Release Pins.
