Product info SPX Series
- 10 -
Ground-stacking an SPX array
Note: Always use an SPX flying frame with extender to stack an array of SPX cabinets.
When stacking on top of a cluster of bassbins it is highly recommended to secure the
flying frame with connectors to the bassbin.
Up to 4 cabinets can be groundstacked by means of the SPX frame with extender. Setup can be
done either by placing cabinets one by one on top of each other or by pre-assembling the array
on the floor and tipping the complete cluster including frame. The latter is explained below.
Step 1
Pre-assembly the array of cabinets on the floor with the angles between cabinets as needed.
Step 2
Attach the flying frame including extender at the intended angel.
