7
iii) Locate the 4 wing nuts underneath the CD mechanism shelf. (see below fig. 3)
Unscrew the wing nuts until they spin freely, (this helps the mechanism ‘float’, for
optimum performance).
iv) Plug the jukebox in and switch the mains power switch on. (location of power switch
is shown in Fig 1 on page 5) The front LED display (located on the shelf in front of the
CD mechanism) will show “TRANSIT”.
v) Locate the transit switch on the inside right of the cabinet. (see fig.3) Switch to
Operate
mode, the CD lifting mechanism will traverse to the left, and then return to
its central position. The front LED display will show “OPE”.
vi) Close the jukebox door. The display will show “CH-01” along the top. Below this
will be displayed “100 - 01”
vii) The jukebox is now ready to play.
VIEW OF LOCATION OF MECHANISM RETAINING SCREWS AND
TRANSIT SWITCH
Wing nuts x 4. loosen to allow
mechanism “floating”
Transit switch
FIG 3
