16
6) Adding additional speakers
The D4 Digital Amplifier has 4 independent outputs, configured as 2 stereo pairs.
2 outputs are used to drive the Jukebox’s internal speakers (Shown on amplifier as
Channel 1) leaving 2 outputs (left and right) free for the connection of additional
speakers (Shown on amplifier as Channel 3). If you have a D2 amplifier channels 3/4
are unavailable.
In the rear of the Jukebox is the ‘Speaker Matching Pad’ (Fig 10 above) Additional
speakers should ideally be set-up in a stereo configuration where the left speaker is
connected to CH3 and the right speaker is connected to CH4.
The volume for these speakers is controlled using the ‘Channel 3/4’ volume keys on
the remote control. These keys are the VOL buttons on the RIGHT hand side of the
control. The keys on the left hand side control Channels 1/2. (see fig 7 on page 13) All
volume controls are highlighted in blue on the diagram.
The additional speakers should not present a load lower than 4 Ohms to each
amplifier channel, please contact Sound Leisure if you are unsure which speakers are
suitable or would like a different speaker set-up to the one described above.
FIG 10.
(Shown with internal speakers connected)
