PAT TESTING
When used in an office environment, we recommend that this product should be safety-tested yearly by a
qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every
change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must be inspected at least once
every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory for new buildings).
DISPOSAL AND RECYCLING
You must not dispose of this appliance with domestic household waste.
Most local authorities have specific collection system for appliances and disposal is free of charge to the end-
user.
When replacing an existing appliance with a similar new appliance your retailer may take the old appliance for
disposal.
PRODUCT SAFETY
Children shall not play with the unit.
Do not use in close proximity to gas appliances
Do not use unless correctly assembled.
Do not cover when in use.
Do not place the mains lead beneath a carpet or rug.
Do not use the unit in locations where paint, petrol or other flammable liquids are used or stored.
Do not use this unit in the immediate surroundings of a bath, a shower or a swimming pool.
MAINTENANCE
Before cleaning, turn the unit off, and disconnect from the mains supply. The unit may then be cleaned using a
damp cloth with a drop of washing-up liquid to remove any dust or dirt from the case. Do no use stronger
detergents or solvents as these may damage the paint finish
Using a stylus brush, remove any dust from the stylus.
If the mains lead is damaged, it must be replaced by the manufacturer or and authorised service centre.
If the mains plug needs to be replaced, proceed as follows:
Connect the brown wire to the terminal labelled "L".
Connect the blue wire to the terminal labelled "N".
If the plug is fitted with a 13 A fuse, replace it by a 3 A fuse.
Make sure that the cord-grip is positioned correctly (over the outer sheath of the cable) and it fully tightened.
TECHNICAL SPECIFICATION
Dimensions:
335×425×120 mm
Weight:
2.9 kg
Power supply:
230 V ~
Power consumption
5W
