Sound ID SIX headset.
To DEACTIVATE A2DP:
Press stop on your media device.
To REJECT a phone call:
Press and hold the Main Button for 2 seconds while the phone is ringing.
To VOICE DIAL:
Press and hold the Main Button for 2 seconds. Note: You must have a phone that supports this
feature. Are you sure?
To REDIAL
the last number called: Tap the Main Button twice. . Are you sure?
To RECONNECT with your mobile phone:
The Sound ID SIX will automatically attempt re-connection with
your mobile phone after first being disconnected. If the connection is not made, you will need to manually
reconnect by turning your headset OFF, and then back ON.
To RESET your headset:
If you experience problems, you can perform a reset to factory default on your headset. Before resetting, be sure
to delete the “Sound ID SIX” from the phone’s Bluetooth menu.
Place the headset into pairing mode and wait for it to flash red and green. Then tap the Main Button twice. The
status light will turn ORANGE for a few seconds indicating “Reset” and then it will go into pairing mode. You
must then re-pair the headset to your phone.
Care and Maintenance
To keep your Sound ID SIX headset in best condition:
•
Never leave it in direct sunlight or in a closed car during hot weather.
•
Avoid placing it in back pockets and improper handling.
•
Never immerse your Sound ID SIX in any liquid. Avoid hair spray, perfume, and sunscreens as they can
cause damage to the housing or electronic components.
•
For the highest quality sound, you'll need to keep your Sound ID SIX clean and free from earwax. You
can do this by removing the eartip and washing it with warm water and mild soap. Rinse and be sure to
let it dry before use.
Safety Warnings
