Sound ID 300, Быстрый старт и руководство пользователя

Страница: 6 / 76

To turn it ON: Press and hold the Main Button for approximately three
seconds. The status light will flash green when the headset is on.
To change the volume: Most handsets will allow you to change
the headset volume using the volume control on the phone. In this
case the Sound ID 300 remembers the new volume level.
The volume can also be changed on the headset. The headset has
four volume settings which can by cycled through by pressing the
Volume/PersonalSound
™ Program Button (VPB) briefly for each step.
You will hear a beep at the maximum volume step; upon the next press,
the volume goes back to lowest step.
To answer a phone call: Press the Main Button when the Sound ID
300 rings.
To end a phone call: Press the Main Button.
To make a phone call: Use the mobile phone to initiate the call. The
audio will automatically transfer to your Sound ID 300 headset.
To turn it OFF: Press and hold the Main Button for three seconds.
The status light will turn red when the headset turns off.
How It Works
2