background image

.14.

Listening to Tuner

Listening to a Station

Note: 

Position  the  antenna  as  far  away  as 

possible  from  the  AC  adapter,  a  TV,  or  other 
radiation source.

1.

   

Plug  the  supplied  FM  antenna  into  the  

FM.ANT

 jack located on the back of unit.

2.     Press the "       " button to power on the system.
3.   Select tuner mode with the 

SOURCE

 button 

on the remote App.

4.    Select a desired radio station for listening.
5.      Move the antenna in various directions until 

the clearest signal is recieved.

6.    If necessary, adjust the volume level.

Press the Button

Functions

Remote App

 

Switch between the frequency 

display  and  channel  number 
display.

 

Hold this button to enter saving 

mode. Press to save a channel. 
(see "Presetting a station”)

  

Select a channel (from 01 to 20).

  

Change     frequency     (from 

87.5 MHz to 108.0 MHz).

  

Hold for more than one  second 

to   activate   the   Auto   Scan 
function,  and   then   release  
the   button.   The   frequency  
will  be  scanned automatically 
until a radio station is found. 
Or press again to quit search 
while searching.

Presetting a Station

Note:

  Presetting  station  function  can  be 

completed  through  the  Soundfreaq  App,  in 
either iPod or Bluetooth mode.

1.  Select tuner mode with the 

SOURCE

 button 

on the remote App.

2.  Switch to the frequency display if the display 

is channel number. 

3.  Tune a desired frequency. You can use either  

of the below methods to tune the frequency.

A. Manual Tuning

 - Briefly press "      "/ "      " 

button  repeatedly  to  move  frequency  to 
frequency  (from  87.5  MHz  to  108.0  MHz) 
until you find the desired station. 

B.  Auto Scanning

 - Hold "       "/ "       " button 

until  the  frequency  display  starts  flashing. 
The frequency will be scanned automatically 
until a station is found. 

4.   Hold "          " button to start storing a station.

   The channel number and “Select” word start 

blinking  together  on  the  display  of  the 
iPad/iPhone/iPod touch.

5.   Use "       "/ "       " to select the channel number 

(from 01 to 20) to be set.

6.  Press "        " button again to store the frequency. 

The  selected  frequency  will  then  be  stored 
with the preset channel number.

The FM radio function can be accessed by: 

1)   the remote App, when Bluetooth connection 

has been built; 

2)    the remote App, when the iPad/iPhone/iPod 

touch is set on the unit.

The operation interface of remote App software 
is  similar  to  the  remote  control. You  can  easily 
operate  the  tuner  function  on  the  display  of 

iPad/iPhone/iPod touch.  

FM Antenna

Содержание SFQ-03























Отзывы: