Sound Devices PIX 260i Скачать руководство пользователя страница 35

Страница: 35 / 97

PIX 260i User Guide

Recor

ding

Mono Wave files can be written to a maximum of 2 SSD’s. Recording Mono Wave files to a mechanical
(spinning) hard drive is not supported.

Poly (Wave)

File Format writes a single file to each target drive per take. All armed audio tracks are

interleaved into a single file.

If File Name Format is set to Reel-Scene-Take_Track Name, but WAV poly files are being recorded, the
alternative format of Reel-Scene-Take will be used.

Audio Mode Settings

Certain Setup Menu options apply only to Audio Mode:

•

[Timecode/Sync - Sync Ref - Audio Only Mode]

: This determines the sync reference source clock

for audio mode. The source can be set to Internal, Word Clock (Sync In), AES1-2, Video Input (SDI/

HDMI), or Video Ref (Sync In).

After changing the Sync Reference in Audio Mode, allow approximately 10 seconds before recording.

•

[Audio - Audio Mode Sample Rate]:

This menu option only applies when the

[Timecode/Sync - Sync Ref - Audio Only Mode]

is set to

Internal

. The default sample rate is 48

kHz. Audio Mode allows for 44.1 kHz or 48 kHz recordings.

•

[Audio - Audio Mode Bit Depth]

: The bit depth of recorded audio in Audio Mode. The default Bit

Depth is 24. Audio Mode allows for 16- or 24-bit recordings.

•

[Audio Mode - Pre-Roll Time]

: In Audio Mode, a continuous audio buffer of up to 10 seconds

is maintained. The Pre-Roll Time will be “added” to the front of all audio recordings. Timecode

stamps are automatically adjusted to match the Pre-Roll time.

Changing the armed status of any track, changing the value of Setup Menu option

[Audio - Audio Mode Sample Rate]

, or changing the current audio synch reference will reset the pre-

roll buffer.

•

[File Storage - Wave File Split Every]

: The file size that will cause a .wav file split in Audio Mode.

At factory default audio files will automatically split when the file size reaches 4 GB. Audio record-

ings can also be split when the file size reaches 2 GB.

•

[Timecode/Sync - Frame Rate (Audio Only)]

: The frame rate that will be stored in the iXML and

Bext area of the .wav file. The default frame rate is 29.97 non-drop. The available frame rate options

are 23.976, 24, 25, 29.97, 29.97 drop-frame, 30, 30 drop-frame.

If the synchronization source (Setup Menu option

[Timecode/Sync - Sync Reference -Audio Only]

)

is lost while in record, the recording will stop. The

Sync Reference

OSD field will flash red

if the synchronization source is not present. The Audio Input OSD field will flash red if there

is a mismatch between the currently selected audio sync referenece sample rate and the

[Audio - Audio Mode Sample Rate]

setting.

Playback of audio clips is the same as video clips.

see Playback Operation

Содержание PIX 260i


































































































Результаты поиска

Содержание PIX 260i

Отзывы:

Похожие инструкции для PIX 260i

Бренды по названию

Популярные бренды

Sound Devices PIX 260i, Руководство пользователя

Результаты поиска

Содержание PIX 260i

Отзывы:

Похожие инструкции для PIX 260i

Бренды по названию

Популярные бренды