User Guide
24
The Low Cut setting activates and sets the Low Cut filter. Range is Off, 40-160
Hz in 40 Hz steps.
Toggling Phase Inversion
Phase inversion, also known as polarity reversal, can be used to prevent signal
cancellation when a source is dual-mic’d from opposite directions (e.g. snare
top/bottom on a drum kit) or to compensate for incorrectly wired, balanced ca-
bles.
The Phase setting toggles Phase Inversion on and off.
To toggle a track’s phase inversion:
X
From the Channel screen, tap Phase.
Stereo Track Linking
Used to link a pair of tracks when the input is a stereo source. Linking enables
control of the overall level of the pair using a single channel knob. If using a
stereo source, such as keyboard or drum machine, plug that instrument into a
neighboring pair of inputs such as 1-2, 3-4, etc. Link the tracks by setting the
pair’s first Channel Screen>Linking menu to 1-2, 3-4, etc. Linking allows you to
control the level of both channels with just the odd-numbered knob.
For example, the following procedure links tracks 1 and 2.
To link tracks 1-2:
1. Push Channel 1 knob to access that Channel screen.
2. Tap Linking.
3. Select 1-2 for a stereo source.
You’ll now be able to control the level of both tracks 1 and 2 with the Chan-
nel 1 knob.
Configuring Aux In Mode
To configure the Aux/Mic In connector:
1. Tap
.
2. Tap Inputs > Aux In Mode.
3. Select one of the following options:
◦ Mic: Select this option when the Aux/Mic In is to be used with a mic. The
MixPre provides bias voltage for PiP (plug-in-power) mics.
◦ Line: Select this option when the Aux/Mic In is to be used with an unbal-
