Sound Devices A20-Nexus Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 68

background image

FCC Conformity

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

This device complies with FCC RF exposure limits for general population / uncontrolled environments. A separation distance of at
least 20 cm must be maintained between the antenna and all persons. This device must not be co-located with any other antenna or
transmitter. This device has been approved to operate with the antenna type listed below:

Model: W1010 Type: Wireless External Antenna for 2.4 GHz Application
Manufacturer: PulseLarson Max. Gain: 2.0dBi

No change to the antenna type is permitted. Any change to the antenna could result in the device exceeding the RF exposure
requirements and void the user’s authority to operate the device.

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

To comply with FCC part 15 rules in the United States, the A20-Nexus receiver must be professionally installed.
It is the responsibility of the operator and professional installer to ensure that only certified antennas are to be used in the United
States.

A20-Nexus

User Guide

66

«
...
64
65
66
67
68
»

Содержание A20-Nexus





































































Отзывы:

Нет отзывов

Похожие инструкции для A20-Nexus

Бренд: Icom Страницы: 5

MS4200RS - Navigation System With CD Player

Бренд: Jensen Страницы: 65

C-Tech HD 6600 SST

Бренд: Clarke-tech Страницы: 32

Satlook Micro G2

Бренд: emitor Страницы: 24

Бренд: chinavasion Страницы: 45

Бренд: ZoneVu Страницы: 33

SD 236BT/RDS/USB/AX

Бренд: Majestic Страницы: 6

BrunataNet BoxGPRS

Бренд: Brunata Страницы: 16

EasyListener2 230R

Бренд: Phonic Ear Страницы: 53

Бренд: Xoro Страницы: 48

Бренд: Hammarlund Страницы: 73

Бренд: Goodmans Страницы: 2

Бренд: Aiwa Страницы: 37

Accessibility Solution

Бренд: Dolby Laboratories Страницы: 2

Бренд: Yaesu Страницы: 23

Бренд: ITS Telecom Страницы: 13

Бренд: Xoro Страницы: 40

Бренд: Onkyo Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды