Sound Devices 774T, Руководство пользователя и техническая информация

Страница: 61 / 82

59
# Setup Name Setup Description Setup Options
29 Input 1,2: Linking, MS Selects whether the input 1 & 2 levels are
controlled independently or grouped as a pair
with or without mid-side decoding. • Unlinked
Inputs 1 and 2 operate independently
• Linked 1/2
Inputs are linked, channel 1 pot controls level, chan-
nel 2 pot controls pan
• Linked 1/2 and MS
Inputs are linked, channel. 1 pot controls level,
channel. 2 pot controls pan and are decoded for MS
stereo.
30 Line Input 1,2: Gain Control When inputs 1 and 2 are in LINE input mode,
selects whether the gain setting is controlled
by the front panel knobs or by the menu
sensitivity settings below. • Use front panel knobs
• Use sensitivity settings
31
32
33
34 Line Input 1: Gain
Line Input 2: Gain
Line Input 3: Gain
LIne Input 4: Gain Adjusts the input sensitivity in 0.1 dB steps –6
dB and +18 dB. Meters show a pre-fader level of the input signal of
all four inputs on their respective meters to aid in the
adjustment.
35
36
37
38 Input 1: Delay
Input 2: Delay
Input 3: Delay
Input 4: Delay Sets a digital delay for each input. Can be
used to compensate for delay in various
digital wireless microphone units or digital
processors. 0 µsec to 30,000 µsec up to 48.048 kHz Fs
0 µsec to 15,000 µsec up to 96.096 kHz Fs
0 µsec to 7,500 µsec up to 192 kHz Fs
39 File: Marker Mode Enables the user to set cue points on the fly
while recording by pressing the record key. • Markers disabled
No cue marks are set.
• New Cue
Cue markers will be set within one contiguous file.
• New File
A new file is started with each press of the record
key, the take counter is increased by one.
40 File: Max Size Selects the file size where the 744T will close,
then start a new file. The 744T will not record
a file larger than the selected size.
The largest file permissible with the 744T’s
FAT32 file system is 4 GiB
• 4 GB
• 2 GB
• 1 GB
• 640 MB 3.6 GB
1.8 GB
950 MB
450 MB
41 File: Folder Options Allows user to organize files in root and sub-
folders. To not use any folders select <None>
on every level.
• TOP-LEVEL
•MID-LEVEL
• BOTTOM-
LEVEL
<None>, <Add new entry>
<None>,<Add new entry>,
<Daily>
<None>, <Add new entry>,
<Scene>
42 File: View Files Enters the file directory tree for the selected
drive. Highlight media descriptor to navigate the menu
43 File: View Take List Allows user to view the last 200 takes. Takes
can be selected and converted to circle takes. • Circle
44 File: Copy Files Allows the user to select a file or a range of
files to be copied from one storage media to
another. Files will only be copied from their
current directory to a directory of the same
name on the other media. If a file will not fit on
the destination media, user is given the option
to skip that file and continue with the copy or
abort the copy all together. User is advised at
the end of the copy process how many files
were copied successfully. • Copy all {drive}
➞
{drive}
• Last 24 hr {drive}
➞
{drive}
• Last 48 hr {drive}
➞
{drive}
• Flagged {drive}
➞
{drive}
All files, when recorded, automatically
have their flag bit set to “on”
45
File: Copy Flag Reset
Selects whether the flag bit is cleared or not
on files copied from one media to another. • Disabled
• Enabled