09
Installation
1. This product is used for indoor sterilization in unmanned environment. It cannot to be used in the
environment with inflammable and explosive gases.
2. This product satisfying the requirements of the China "General Hygienic Requirements for Air Sterilizer”.
Turn on the unit, UV lamp and negative ion on, operate it for 60 minutes at high speed in a 100m³ space.
Three repeated tests have all achieved the natural bacteria extinction rate of more than 90% for indoor air.
Applicable places and Operation
1. Before operating the unit, open the back panel and take out the pre-filter, HEPA filter and Carbon filter,
then remove plastic packaging from all the filters.
2. Plug the power cord of the unit into a nearby power outlet.
3. The unit has a remote control
.
Put the batteries into the remote control before using it.
Before operation
1. Power supply condition: Use only a 220-240 volt outlet with grounding wire receptacle.
2. Environmental conditions
：
Temperature
：
0
℃
~40
℃
; Relative humidity
：
<75%.
3. The unit should be installed in an indoor area with less personnel activities, and the unit should be set up
against the wall.
