DOC:
IFR12.8V24AH(4S4P)M5
Page
2
Of
9
Pages
1
Model: IFR12.8V24AH(4S4P)M5
2
Application Condition
Customers should use the battery according to the following correct conditions of use, customer should apply BMS to monitor,
manage and protect each battery.
2.1
Authorization
Without authorization, the customer shall not modify or change the design and framework of the battery management system, to
make sure not to affect the performance of the battery.
2.2
Management files
Customer shall build the battery management files. The customer shall keep the monitoring data of the complete battery
operation as a reference for product quality responsibility.
The Soshine does not undertake the product quality assurance responsibility without the inspection data of the complete battery
system.
2.3
Management system requirements
The battery management system needs to meet the following basic requirements:
No.
Parameter
Specification
Protection Action
2.3.1
Absolute Charge
14.2V
Stop charging when the voltage reaches 14.2V
2.3.2
Absolute Discharge
10.8V (Min.)
Stop discharging when the battery voltage reaches 10.8V,
Minimize the current
2.3.3
Charge mode
CC/CV
Constant current charging to 14.2V, constant voltage charging
to 14.2V. Cutoff current 0.01C(240mA)
2.3.4
Short-circuit Protection
Disconnect
When a short circuit occurs, the battery is disconnected from the
over current
2.3.5
Over current Protection
According to 4.11, and
4.14
the battery management system controls the discharge current
to meet the specifications
2.3.6
Overheat Protection
According to4.16 and
4.17
The charge/discharge is terminated when the temperature
exceeds the specification of this specification
2.3.7
Charging Time Protection
Within 8 hours
Stop charging when charging time is over 8 hours
NOTES: As for above No. 11.3.1, 11.3.2, 11.3.4, 11.3.6 are warning clauses, the customer please note: when the battery
reaches any of these describe indicators and parameters, it means that the battery has already beyond the conditions of use, the
customer should be in accordance with the "protection" and other relevant provisions this specification of battery protection
measures, at the same time, Soshine statement on the using state of the battery does not undertake any guarantee responsibility
for the quality.
2.4
Charge
Charging current: The maximum charging current specified in the specification cannot be exceeded.
Charging voltage: Not exceed the highest limit voltage specified in the specification.
Charging temperature: The charging temperature of the battery must be performed in accordance with the temperature range of
the specification.
Charging method: Constant current and then constant voltage charging.
