Page 6/17
Assembly Instructions
MINI Control
www.sorotec.de
V 1.0.0
Functional grounding (FG)
For this section you will need:
#
1 Flachkopfschraube M4
33
1 Flachkopfschraube M6
34
1 Scheibe M4
36
1 Scheibe M6
37
3 Zahnscheibe M4
38
3 Zahnscheibe M6
39
1 Erdungskabel
22
2 Mutter M4
40
2 Mutter M6
41
• Remove the paint 2 mm inside and outside
around the holes for the functional grounding
screws (FG).
• Assemble the internal grounding screw
connection from the screw
33
, the washer
36
,
the toothed washers
38
, the nuts
40
and the
grounding cable
26
as shown in Figs. 6 and 7.
• Assemble the external grounding gland using
the screw
34
, washer
37
toothed washers
39
and nuts
41
as shown in Fig. 8.
Note
The ring cable lugs of ground wires are screwed
between washer and nut as shown in Fig. 7.
Attention!
Make sure there is good electrical contact between
the earthing screw connections and the housing
sheet metal!
Fig. 6: Location of ground connections
Fig. 7: Internal functional ground screw (FG) outside / inside
Fig. 8: External functional ground screw (FG) inside / outside
