10 of 28
Service Record Mio Carbon (Design 2018)
2020-09-01
3.2.2 Widening the seat
3.2 Assembly group seat
To change the seat width by 20 mm / 2 cm, you must make changes to the following four fac-
tors:
• spacer bushing
• back wearing angel
• seat supporting angel
• adjust quick release axle adapter
Please proceed as follows:
• Remove the rear wheels,
• secure the wheelchair against rolling away,
• (1 + 2)
remove the seat plate completely,
• (3)
remove the firm curved back plate from the connection angles to the side panels,
• remove the side panels completely.t.
3.2.3 Seat supporting angle
(2)
Leave the seat supporting angle
(C)
connected to the side guards and remove only the seat
panel.
(1+2)
Completely remove screw connections
(A)
from the seat supporting angle under the seat
plate on both sides.
(1)
(2)
(A)
Blick unter die Sitzplatte
(A) (B)
(C)
3.2.4 Back supporting angle
(3)
Leave the back supporting angle
(C)
con-
nected to the side guard and remove only the
back of the firm curved back plate.
(3)
Completely remove screw connections
(A)
on both sides
(A)
(B)
(C)
(3)
