12 of 44
Instructions for use Loop
SORG
2019-08-16
2 General information
90°
(B)
(A)
(3)
(4)
(D)
(C)
If the seat shell-underframe is equipped with a back angle-adjustment or tilt mechanism,
the occupant must sit in an upright position at a 90° back angle during transport
(3)
.
Leg sup-
ports that can be swung up must be adjusted to the lowest position.
(2)
(1)
Attachment points/methods for transport in motor vehicles
When using the seat shell-underframe as a seat in a motor vehicle, only the po-
sitions marked with the symbol for the attachment point should be used. These can
usually be found at the back left and right
(1)
and at the front left and right.
(2)
The seat shellunderframe must be fixed
with a 4-point wheelchair restraint system
anchored to the vehicle in accordance with
ISO 10542. These may be carabiner hooks,
S-shaped hooks or plug-in fasteners. The
wheelchair restraint system must be secure-
ly fastened and used in accordance with the
user manual of the manufacturer.
(3A+B)
The user must be additionally secured
with a fixed lap belt
(4C)
approved for trans-
port in accordance with ISO 10542 and a
vehicle-anchored shoulder belt
(4D)
so that
the risk of head and upper body injuries can
be minimised to the greatest extent possible.
The seat belts must not be twisted during use, nor must they be guided over any structur-
al components, which would keep them away from the body. They have to be tight and firm
without impairing user comfort. The lap belt buckle must be positioned between the pelvic
bones (if possible in the middle). The buckle tongues on the lap belt for fastening the shoul-
der belt should be located on the outside of the pelvis where possible.
All belts used for transport must be regularly inspected for damage.
A headrest suitable for transport must be used.
The seat shell-underframe must only be used as a forward facing seat in motor vehicles in
accordance with ISO 7176-19. No transport with the seat shell-underframe facing sideways!
Immediately contact your authorised dealer after a collision to check the carriage, frame
and brakes and have any damage repaired by a specialist without delay.
