SORG Loop RS, Сервисная книжка

Страница: 17 / 40

Service Record Loop
SORG
RS 17 of 40 2019-07-16
3.2.2 Frame extension
3.2 Assembly Group Frame
When using a standard firm curved back plate,
a new saddleback for the desired width must
be ordered.
To broaden the framework:
• Remove both drive wheels,
• remove the screw connection (3D +
4D) of the seat plate and then the seat
plate itself.
• Now remove the firm curved back plate
(ERGO back: remove the back center
part) by loosening the screws (2A)
• and remove the screwed connections of
the trusses (1A + 4A) on one side.
• Proceed with the use of a back part with
gas spring adjustment, with the traverse
installed there, analog.
• Now pull the frame apart (half desired
broadening)
• and replace the screws loosely.
• Proceed analogously with all screw con-
nections on the opposite side.
• Then tighten the screws again,
• unscrew the seat plate symetrically
• and screw on the new firm curved back
plate (for ERGO back: screw on the cen-
ter of the spine symmetrically).
The trusses must be offset at the same
distance on both sides.
(1)
(A)
(C)
(C)
(B)
(2)
(A)
(3)
(D)
(4)
(D)
(F)
(E)
(A)