Instructions for use Dynamis MV
13 von 40
2021-12-01
(2)
After insertion, the locking ball (A) must protrude visibly. After each insertion, pull at
least 1x to test whether the quick-release axle is engaged. It should no longer be possible to
pull the wheels outwards.
3.1
Handling of the wheels
(1)
(2)
(2)
(A)
1.
1.
(1)
(1)
Handrim covers can stretch in the heat and loosen from the handrim.
3.1.2 Tire pressure
3.1.1 General information on wheels
Using the handrims to break the wheels creates frictional heat.
You can find the appropriate operating pressu
-
re on the tire casing - usually 3-10 bar.
(1)
If you have a flat tire, please contact your
specialist retailer.
3.1.3 Quick-release wheels
Remove:
Insert:
